Home    Company Information    What's New    Contact Us   
 
Slip Ring Torque Sensor
non-contact torque sensor / slip ring torque sensor / reaction torque
prefab torque & thrust sensor / load pins & cells

slip ring torque sensor Rugged and cost-effective Slip Ring Torque Sensor available in 10 in-lb to 30,000 in-lb. Convenient Brush Release Lever allows the user to release the brushes from contact with the slip rings. This reduces wear during extended periods of operation when data is not required.

A torque-sensitive element in each sensor utilizes bonded-resistance strain gage technology along with coined silver graphite brushes for data transmission. The strain gage bridge is configured to eliminate the effects of bending and thrust strains.

Applications:
Machine Tools -- Extruders -- Conveyors -- Mixers -- Cable Reels -- Fans & Blowers -- Dynamometers -- Any Rotating Machine

Specifications:

PERFORMANCE
Output at Full Scale (F.S.) 1.5 mv/V
Calibration Accuracy 0.25% F.S., CW or CCW
Nonlinearity 0.25% F.S.
Repeatability 0.25% F.S.
Hysteresis 0.25% F.S.
TEMPERATURE
Temperature Range, Safe -50 to 140°F
Compensated 72°F to 150°F +/-3°F
Temperature Effect on Zero Balance 0.0025% F.S. per °F
ELECTRICAL
Excitation 10 VDC
Zero Balance @ 72 +/- 3°F 2.5% F.S.
Terminal Resistance, Input 350 +/- 1.5 ohms
Terminal Resistance, Output 350 +/- 3 ohms
TERMINATION
MS3102A-18-8S-A105 connector with mating 15 ft. cable assembly or equivalent
Insulation Resistance
Bridge to Ground 2,000 megohms
Shield to Ground 1,000 megohms
OVERLOAD RATINGS
Safe 120%
Electrical Failure 300%
Options:
Consult factory for minor dimensional modification and available RPM sensors


   

Home | e-mail: sales_testservices@teledyne.com

Copyright © 2010 Teledyne Technologies Incorporated. All rights reserved.
Teledyne Test Services • 513 Mill Street • Marion, MA 02738 • USA